How to install our wallcoverings
Go step by step
It is really easy! And, feel free to be creative…
Glass fibre wallcoverings are carefully inspected before dispatch but still require inspection before being applied. In the case of any complaints, please post the label, a sample of the defect and the details back to us. Before application, make sure that the wall is clean (free of dust and grease) dry, smooth and compact. When applying the wallcoverings, the temperature in the room must not be below 8°C.Download instructions PDF
Saint-Gobain ADFORS TV
Watch more videos on our YouTube channel.Discover our channel
Cut off a strip 5 or 10 cm longer than the wall height.
Apply a sufficient layer of vinyl glue on the wall with a roller (200 g/m², +/- 10 %).
Apply the strip to the wall in a vertical direction using a plumbline, and smooth it with a clean soft roller or plastic spatula.
Apply another strip to the edge of the previous one and check for a proper alignment. Repeat steps 1, 2 and 3.
Trim excess material with a knife.